Description
Brand new high output stator
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation.
- Highest grade of lamination materials
- Highest grade of copper winding, resistant to 200 degrees Celsius.
- Pick up pulsar coil included
- Connector included
- Back Plate included
- All products shipped are tested
20% MORE OUTPUT OVER STOCK, WORKS WITH ALL OTHER OEM COMPONENTS.
We have even included the opposite connector (main harness side) as we know these are often melted / corroded / defective and a major cause of repetitive electrical issues.
All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.
Specifications:
Dimensions:
- Interior diameter: 34 mm
- Exterior diameter: 92 mm
- Thickness: 15 mm
- Length of wires stator to grommet: 75 mm
- Length of wires grommet to plug:900 mm
- Length of pickup coil’s wire to grommet: 80 mm
Other specifications:
- Number of wires: 8
- Number of plugs: 3
- Number of pins: 8
Wire to wire resistance:
- Alternator: Between each Yellow = 0.4 ohms +/-20%
- Alternator: Yellow to Ground = 0.L Pickup : Green to Blue = 250 ohms +/-20%
- Source: Black/Red to Blue = 36 ohms +/-20%
- Source 2: Blue to White = 7 ohms +/-20%
Note: Battery condition is extremely important. No stator can work correctly with a bad or weak battery.Always fully charge your battery before performing any charging system tests or replacing parts.If there is any doubt, have the battery load tested or replaced.
Reviews
There are no reviews yet.